Introduction to htrSPRanalysis

Sample information column definitions

• Incl. - Whether or not to include this sample
• Block/Chip/Tray - The block the sample is in. This may be any combination of 1,2,3,4 - separated by commas. Use multiple values for replicates
• Position/Channel/Sensor - The sample well id in the format of a letter (A-H) followed by a number (1-12). The user may enter ranges (for example A1-B12) when there are replicates. The software will automatically generate a row in the sample information data frame for each of the 384 spots on the chip.
• Analyte - the name of the analyte
• Ligand - the name of the ligand
• Baseline - the length of the baseline data collection phase
• Association - the length of the association phase
• Dissociation - the length of the dissociation phase
• Assoc. Skip - the length of time to skip in the beginning of the association phase. Not currently implemented
• Dissoc. Skip - the length of time to skip in the beginning of the dissociation phase. Not currently implemented
• All Concentrations - the concentrations of analyte used. This is a list, separated by commas. It must be the same length as the number of time series corresponding to this spot.
• Incl. Concentrations - either a comma separated list of 4 or 5 consecutive concentrations to use for curve fitting or the string “All”. If “All” is entered, the software will automatically choose 4 or 5 optimal concentrations, as described in the documentation.
• Bulkshift - whether or not to force a fit of bulk shift. Value should be “Y” or “N”
• Regen. - whether or not the surface of the chip is regenerated between cycles
• Bsl Start - start time for using the baseline data to perform baseline correction, if the entire baseline is not to be used
• Base Corr - whether or not to perform baseline correction
• Global Rmax - if set to “Y”, the Rmax will be fit globally (one Rmax for all concentrations), otherwise Rmax is fit locally (one per concentration)
• Automate Dissoc. Window - whether or not to automate the length of dissociation phase data used in curve fitting.
• Automate Bulkshift - whether or not to automatically detect bulk shift

Reading and processing input files, obtaining user supplied options

The function process_input when executed in Rstudio will prompt the user for the sample information file and the titration data file. It will also prompt for settings such as the minimum and maximum RU to use for the dissocation window determination, the maximum iterations and the tolerances ptol and ftolto use for the non-linear least squares curve fit. It returns a list object with the sample information, the original time series, the baseline adjusted RUs and several other variables used internally. This is the object that will be passed to the functions for fitting and plotting.

As soon as these files are selected, the software will read in both files and check that the formats are correct. This may take some time, depending on the size of the titration data file.

Next, the user will be prompted to select the minimum allowed k_d. This is used in the curve/parameter fitting as a lower bound.

The maximum number of iterations is the number of iterations at which the optimization algorithm should stop if convergence is not obtained.

The automatic detection of the dissociation window will be suppressed if the maximum RU is too high or the minimum RU is too low. The following prompts allow the user to determine these.

It is highly recommended that this software be run on a high-performance platform. The compute-intensive processes are all parallelized. The software automatically detects the total number of cores available. The user can change this to their preferred value.

There are three default output files:

1. A .pdf file with each page corresponding to a spot on the chip. For each spot, there is a sensorgram with the baseline corrected data and the fitted RU curve for each concentration used to fit the curves/parameters, a residual plot, a response curve showing the selected concentrations and a table of kinetics parameters and their standard errors.

2. A .pdf file that tracks any errors encountered in fitting/plotting

3. A .csv file that outputs all fitted parameters and their standard errors

The software uses the data directory as the default output path, and uses the sample information filename along with a time/date stamp to name each output file. These can be changed by the user via arguments to process_input

Output

As explained in the previous section, the standard pipeline outputs 3 files, a .pdf consisting of plots and tables for each spot on the chip:

The Pipeline

# CRAN has strict limits on package sizes, and the titration files tend to be
#large. Therefore, we will need to download the titration data from the gitlab 
#repository. The following will download necessary files from gitlab onto
#your computer.

# By default, the files will go to the temp directory for this R session. 
# To change this, change the filename in destfile 

destfile <- file.path(tempdir(),"titration_data.xlsx")

download.file("https://gitlab.oit.duke.edu/janice/htrspranalysis/-/raw/master/inst/extdata/titration_data.xlsx?ref_type=heads",
              destfile = destfile, mode = "wb")

sample_sheet_path <- system.file("extdata",
                                 "sample_sheet.xlsx",
                                 package="htrSPRanalysis")

data_file_path <- destfile

output_file_path <- tempdir()

# process the input
processed_input <- process_input(sample_sheet_path,
                    data_file_path,
                    num_cores = 2,
                    output_file_path = output_file_path)

Obtain plots of raw data

plots_before_processing <- get_plots_before_baseline(processed_input)

Example plot:

plots_before_processing[[1]]
#> Warning: Removed 225 rows containing missing values or values outside the scale range
#> (`geom_point()`).

Fit the data to the 1:1 Languir model

fits_list <- get_fits(processed_input)

Plot the sensorgrams with fitted curves

plot_list <- get_fitted_plots(processed_input, fits_list)

Example plot:

plot_list[[1]]

Create the response curve plots

These plots show the average response vs log₁₀ of the concentration of analyte. The color indicates the concentrations selected for fitting. These should be within the linear part of the curve.

rc_list <- get_rc_plots(processed_input)

Example plot

rc_list[[5]]

Create a pdf with fitted sensorgrams, curve parameters, standard errors, residual plot and response curve.

pdf_pages <- create_pdf(processed_input, fits_list, rc_list, plot_list)

Create a .csv file with all model parameters and standard errors.

parameter_table <- create_csv(processed_input, fits_list)

Pipeline

sample_sheet_path <- system.file("extdata", "bulkshift_example_sample_sheet.xlsx", package="htrSPRanalysis")
data_file_path <- system.file("extdata", "bulkshift_example_titration_data.xlsx", package="htrSPRanalysis")

# process the input

pdfpath <- tempdir()


bulkshift_example <- process_input(sample_sheet_path = sample_sheet_path,
                data_file_path = data_file_path,
                num_cores = 2, 
                output_file_path = pdfpath)
#> Joining with `by = join_by(Sample, Block)`
#> New names:

bulkshift_plots_before_processing <- get_plots_before_baseline(bulkshift_example)

bulkshift_fits <- get_fits(bulkshift_example)

bulkshift_plots <- get_fitted_plots(processed_input = bulkshift_example,
                                    fits_list = bulkshift_fits)

bulkshift_rc <- get_rc_plots(processed_input = bulkshift_example)

Output

bulkshift_plots_before_processing[[1]]
#> Warning: Removed 114 rows containing missing values or values outside the scale range
#> (`geom_point()`).

bulkshift_plots[[1]]

bulkshift_rc[[1]]

create_pdf(processed_input = bulkshift_example, 
           fits_list = bulkshift_fits,
           rc_list = bulkshift_rc)

create_csv(processed_input = bulkshift_example, 
           fits_list = bulkshift_fits)
#> # A tibble: 1 × 42
#>   Ligand Analyte Block Row   Column   ROI Rmax1 Rmax2 Rmax3 Rmax4 Rmax5 Rmax_se1
#>   <chr>  <chr>   <dbl> <chr>  <int> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>    <dbl>
#> 1 Antib… Antige…     1 A          1     1  59.8  71.9  83.6  87.8  91.4     2.78
#> # ℹ 30 more variables: Rmax_se2 <dbl>, Rmax_se3 <dbl>, Rmax_se4 <dbl>,
#> #   Rmax_se5 <dbl>, ka <dbl>, ka_se <dbl>, kd <dbl>, kd_se <dbl>, KD <dbl>,
#> #   KD_se <dbl>, Bulkshift1 <dbl>, Bulkshift2 <dbl>, Bulkshift3 <dbl>,
#> #   Bulkshift4 <dbl>, Bulkshift5 <dbl>, Bulkshift_se1 <dbl>,
#> #   Bulkshift_se2 <dbl>, Bulkshift_se3 <dbl>, Bulkshift_se4 <dbl>,
#> #   Bulkshift_se5 <dbl>, R01 <dbl>, R02 <dbl>, R03 <dbl>, R04 <dbl>, R05 <dbl>,
#> #   R0_se1 <dbl>, R0_se2 <dbl>, R0_se3 <dbl>, R0_se4 <dbl>, R0_se5 <dbl>